Best $800 PC Build for Baldur's Gate 3 (2026)
The best $800 build for Baldur's Gate 3 pairs the RTX 3060 with the AMD Ryzen 5 5600X3D — 75 FPS average in Baldur's Gate 3 at 1080p, across 7 parts, for an approximate build cost of $717 as of October 2026.
Open this build in the System Builder
Load 6 of these parts into the System Builder to check compatibility and re-total the list — the $717 above is an approximation against the $800 target. Swap anything you already own.
$800 Baldur's Gate 3 build at a glance
| Budget target | $800 |
|---|---|
| Approximate build cost (October 2026) | $717 |
| Under budget by | $83 |
| Graphics card | RTX 3060 |
| CPU | AMD Ryzen 5 5600X3D |
| Target resolution | 1080p |
| Average FPS in Baldur's Gate 3 (1080p) | 75 FPS |
| Parts in this build | 7 |
Approximate figures as of October 2026 — not live prices.
Recommended Parts List
| Component | Part | Price | Buy |
|---|---|---|---|
| Graphics Card | RTX 3060 | ~$280 (estimated) | View at Amazon |
| CPU | AMD Ryzen 5 5600X3D | $127 | View at Newegg |
| Motherboard | ASRock B760M Steel Legend WiFi | $66 | View at Newegg |
| Memory | Klevv CRAS 16 GB (4x4GB DDR4-2800) | $84 | View at Amazon |
| Storage | 1 TB NVMe SSD | ~$65 (estimated) | — |
| Power Supply | SAMA GT 650W | $45 | View at Newegg |
| Case | V200 Micro ATX/ITX Computer Case,Multifunctional Pc Case, Spcc Side Panel Business case, Support 250mm VGA Card 140mm CPU Cooler (White) | $50 | View at Newegg |
| Total build cost (approx., October 2026) | $717 | ||
5 of 7 priced from our catalog, rest estimated. Check the retailer before you buy.
Build this parts list in one click
Every matched part above drops into the System Builder: compatibility checks, a per-part price total, and a one-click buy list for your Baldur's Gate 3 build.
Expected FPS in Baldur's Gate 3 by Resolution
Every cell is a measured average — the RTX 3060 row is this build's card.
| Graphics card | 1080p avg FPS | 1440p avg FPS | 4K avg FPS |
|---|---|---|---|
| RTX 3060this build | 75 FPS | 55 FPS | 30 FPS |
| RTX 5090 | 234 FPS | 215 FPS | 143 FPS |
| RTX 4090 | 180 FPS | 165 FPS | 110 FPS |
| RTX 5080 | 166 FPS | 152 FPS | 101 FPS |
| RX 7900 XTX | 158 FPS | 145 FPS | 97 FPS |
| RTX 5070 TI | 155 FPS | 142 FPS | 95 FPS |
Averages from PlanMyPC benchmark runs and community-submitted results for Baldur's Gate 3. A dash means we have no measurement for that card at that resolution — we never estimate a frame rate we have not measured.
Why This Build for Baldur's Gate 3
On Ultra at 1080p the RTX 3060 averages 75 FPS in Baldur's Gate 3, 45 under the 120 Hz the title is usually played at. Cap an entry build at 60 Hz and it holds; chase 120 Hz and Cloud Quality is what pays for it.
The cheapest step up in our Baldur's Gate 3 numbers is the RTX 5070 TI: 155 FPS at 1080p, 80 more than the RTX 3060 and about 107% in this title. That is the card that takes Baldur's Gate 3 over 120 Hz, which is the honest reason to want it. What it sells for the week you buy decides it; this build caps graphics at $350 and spends the rest where Baldur's Gate 3 will still need it in two years.
Divinity 4.0 keeps every NPC, spell surface and stacked status effect inside a turn-resolution simulation, so this game gets heavier as your save gets older rather than as the scenery gets prettier — Act 3's Lower City is where frame rate falls off a cliff, and it falls on the CPU while GPU load barely moves from what Act 1 asked for. Baldur's Gate 3 being CPU-bound is good news on a tight budget: the AMD Ryzen 5 5600X3D sets the frame rate, and money not spent past the RTX 3060 was never going to reach the screen.
Across the resolutions we have measured the RTX 3060 at in Baldur's Gate 3 — 1080p: 75 FPS, on Ultra, asking about 6 GB; 1440p: 55 FPS, on Ultra, asking about 7 GB; 4K: 30 FPS, on High, asking about 9 GB. We quote the entry build at 1080p; move the target and Baldur's Gate 3 charges you the difference, starting with Cloud Quality.
Video memory is the usual entry-build trap: Baldur's Gate 3 wants near 6 GB on Ultra at 1080p, against 12 GB on the RTX 3060 — 6 GB spare, enough that Baldur's Gate 3 textures are not a decision a $800 buyer has to make.
Baldur's Gate 3 ships DLSS and FSR. DLSS on Quality is the cheapest frames an entry build can get in Baldur's Gate 3 — reach for it before you touch Cloud Quality.
Baldur's Gate 3 Settings for This $800 Build
The 75 FPS on this page is the RTX 3060 running Baldur's Gate 3 on Ultra at 1080p, the resolution $800 is built around. For more than that, start at Cloud Quality: these are ranked by what Baldur's Gate 3 gives back first.
- Cloud Quality
- Shadow Quality
- Dynamic Crowds
- Subsurface Scattering
- God Rays