Free — real-time validation, no account

PC part compatibility checker

Paste a parts list, or add parts to the PlanMyPC builder, and every component is validated against the rest — CPU socket, motherboard form factor, RAM support, power-supply wattage, and case clearance across 32 categories — so you catch conflicts before you buy.

Paste your parts list

One part per line or separated by |. A PCPartPicker text export or a Reddit parts table works too. Links are not opened.

No list yet?

Pick parts one by one in the builder: each part is checked against the rest as you add it.

See worked examples

How do I check PC part compatibility?

Add your parts to a build tool that validates them together. PlanMyPC's free compatibility checker verifies CPU socket, motherboard form factor, RAM type, power-supply wattage, and case clearance in real time and flags any conflict before you buy — no account needed.

Prefer to check by hand first? Will these PC parts work together? walks through the eight checks to do by hand and the exact specs to compare.

Worked examples: is this PC build compatible?

Real parts lists from our catalogue and what the checker reports for each, checked on . Open any of them in the planner to run the check yourself, see what each part costs and swap parts.

A 1440p gaming build with no conflicts

Not fully verified

Socket, memory, power and board-size checks pass. The cooler and graphics card clearances stay unverified: our catalogue has no real clearance figures for this case yet, so check its maximum cooler height and card length on the maker's spec sheet. The checks we cannot run yet, such as BIOS support and power connectors, are listed with the verdict too.

  • AMD Ryzen 7 9800X3D
  • Thermalright Peerless Assassin 120 SE
  • Gigabyte B850 AORUS ELITE WIFI7
  • TEAMGROUP T-Force Vulcan 32 GB (2x16GB DDR5-6000)
  • Samsung 990 Pro 2 TB
  • Asus PRIME OC GeForce RTX 5070
  • NZXT H5 Flow (2024)
  • MSI MAG A850GL PCIE5 850W
Open in the planner

AM5 processor on an AM4 motherboard

Incompatible: CPU socket

The Ryzen 7 9800X3D is an AM5 chip and the MSI PRO B550M-B is an AM4 board, so the processor will not fit the socket.

  • AMD Ryzen 7 9800X3D
  • MSI PRO B550M-B
  • G.Skill Ripjaws V 32 GB (2x16GB DDR4-3200)
Open in the planner

DDR4 memory on a DDR5 motherboard

Incompatible: Memory type

AM5 boards take DDR5 only. DDR4 sticks are keyed differently and will not go into the slots.

  • AMD Ryzen 7 9800X3D
  • Gigabyte B850 AORUS ELITE WIFI7
  • G.Skill Ripjaws V 32 GB (2x16GB DDR4-3200)
Open in the planner

RTX 5090 on a 750 W power supply

Incompatible: Power supply wattage

The RTX 5090's reference board power is 575 W. With the Ryzen 7 9800X3D at its 162 W full-load power and 75 W for the rest of the system, the estimate is about 812 W, more than the supply delivers.

  • AMD Ryzen 7 9800X3D
  • Asus TUF GAMING GeForce RTX 5090
  • MSI MPG A750G PCIE5 750W
Open in the planner

RTX 5070 Ti on a 650 W power supply

Warning: Power supply wattage

About 605 W, with the Ryzen 9 9950X at its 230 W full-load power, fits under 650 W. It is above 80% of the rating, so the check warns: little headroom for load spikes or a later upgrade.

  • AMD Ryzen 9 9950X
  • Asus TUF GAMING GeForce RTX 5070 Ti
  • MSI MAG A650GL 650W
Open in the planner

Four memory sticks on a two-slot motherboard

Incompatible: Memory slots

The kit is four 8 GB sticks, and this board lists two memory slots.

  • AMD Ryzen 5 5600X
  • MSI PRO B550M-B
  • Corsair Vengeance RGB Pro SL 32 GB (4x8GB DDR4-3200)
Open in the planner

Three M.2 drives on a board with two M.2 slots

Incompatible: M.2 slots

Each M.2 drive needs its own slot. The third one needs an adapter card, or swap it for a SATA drive.

  • AMD Ryzen 5 5600X
  • MSI PRO B550M-B
  • 3× Samsung 990 Pro 2 TB
Open in the planner

ATX motherboard in a Micro-ATX case

Incompatible: Motherboard size

The Montech AIR 100 LITE takes Micro-ATX and Mini-ITX boards, so a full-size ATX board will not mount in it.

  • Gigabyte B850 AORUS ELITE WIFI7
  • Montech AIR 100 LITE
Open in the planner

What the compatibility checker validates

13 checks run automatically as you build. Each conflict is explained in plain language, and a check whose specs are missing says “not verified” instead of passing.

CPU ↔ motherboard socket

Confirms the processor's socket (e.g. AM5, LGA1700) matches the motherboard's. Chipset and BIOS support are not checked yet, so a new CPU on an older board may still need a BIOS update.

Motherboard form factor ↔ case

Checks that the board size (ATX, mATX, Mini-ITX) fits inside the selected case's supported form factors.

RAM type, slots & capacity

Validates DDR4 vs DDR5 against the board, the number of sticks against its memory slots, and the total against its maximum capacity. Memory speed (XMP/EXPO) is not checked.

Power supply wattage

Adds up the CPU and graphics card power plus 75 W for the rest of the system, flags a supply below that and warns above 80% of its rating. The CPU counts at its full-load power (Intel's maximum turbo power, AMD's PPT), not its base TDP, and a card listed with a placeholder figure counts at its chip's reference power.

GPU & cooler clearance

Compares graphics-card length and thickness and air-cooler height against the case's limits so nothing physically collides. Most cases in our catalogue have no real length and height limits yet; for those the check says it could not run, so confirm them on the case's spec sheet.

M.2 slots, cooler & PSU fit

Counts M.2 drives against the board's M.2 slots, checks the cooler lists your CPU's socket and is rated for its TDP, and that the case takes the power supply's size.

The 13 checks

  • CPU socket
  • Memory type
  • Memory capacity
  • Memory slots
  • Graphics card length
  • Graphics card thickness
  • Power supply wattage
  • Power supply size
  • M.2 slots
  • Cooler socket support
  • Cooler height
  • Cooler rating
  • Motherboard size

Not checked yet

  • Chipset and BIOS support
  • Memory speed (XMP / EXPO)
  • ECC and registered memory
  • Memory voltage
  • Graphics card power connectors
  • M.2 and SATA lane sharing
  • Radiator mounts
  • Front-panel connectors
  • TPM for Windows 11

Check these yourself against the parts' manuals. When one applies to your build, the verdict usually notes it as “not verified”.

How to check PC part compatibility in 5 steps

  1. 1

    Open the system builder

    Go to the PlanMyPC system builder. No account or sign-up is required to start a build.

  2. 2

    Add your CPU

    Pick a processor. This sets the required socket, which every later part is validated against.

  3. 3

    Add a compatible motherboard

    The builder can filter to boards that match your CPU's socket, then checks form factor against your case.

  4. 4

    Add RAM, GPU, PSU and case

    As you add memory, a graphics card, a power supply, and a case, PlanMyPC validates RAM type, wattage headroom, and physical clearance in real time.

  5. 5

    Review the compatibility summary

    Any conflict is flagged with a clear reason. Resolve warnings, check each part's price and the build total, then save or share your finished build.

Compatible and affordable

Once your build passes every compatibility check, PlanMyPC shows each part's price from the retailers we track and adds up your build total — so the parts that fit together also fit your budget.

Explore PlanMyPC

Frequently asked questions

How do I check PC part compatibility?

Add your parts to a build tool that validates them together. PlanMyPC's free compatibility checker verifies CPU socket, motherboard form factor, RAM type, PSU wattage, and case clearance in real time and flags any conflict before you buy.

Is the PlanMyPC compatibility checker free?

Yes. Real-time compatibility checking is completely free, with no premium tier and no account required. You can validate a full build and see part prices without signing up.

Does it check if my CPU and motherboard are compatible?

Yes, by socket: the checker confirms the CPU socket matches the motherboard (for example AM5 or LGA1700). It does not check chipset or BIOS support yet, so for a new CPU on an older board, look for it on the board's CPU support list.

Will it tell me if my power supply is powerful enough?

Yes. It adds the CPU at its full-load power (not its base TDP) and the graphics card at its board power (its chip's reference figure if the listing is a placeholder), plus 75 W for the rest, flags a supply below that and warns above 80% of its rating.

Can it check RAM and case clearance too?

Yes: RAM type (DDR4 vs DDR5), stick count and capacity against the board, and GPU length and thickness and cooler height against the case. Most cases in our catalogue have no real clearance figures yet, and the check says so. Memory speed (XMP/EXPO) is not checked.

Check your build for free

Real-time compatibility, a running build total, and a shareable link — no account needed.